Specifications
Equipped With
GENERAL SPECIFICATIONS:
NEW APPROXIMATELY 1990
MACHINE:
GRINDING LENGTH BETWEEN CENTER LENGTH
:STRAIGHT PLUNGE CUT 69
:30 DEGREE ANGLE PLUNGE CUT 59
GRINDABLE BORE DEPTH 11.8
WORK PIECE LENGTH INCLUDED CHUCK
:WHEN MAX. BORE DEPTH IS UTILIZED 47
WORK TABLE TRAVERSE 80
TAILSTOCK TRAVERSE 80
CENTER HEIGHT 5.9/7.1
GRINDABLE DIAMETER:
:EXTERNAL STRAIGHT PLUNG CUT 11.8/14.1
:EXTERNAL ANGLED PLUNG CUT 11.8/11.8
:INTERNAL 11.8/14.1
SWING DIAMETER 11.8/14.1
WORK PIECE WEIGHT
:BETWEEN CENTERS (STRENGTHEN) 660
:CHUCKED INCLUDING CLAMPING MEANS 176
CHUCKING DIAMETER 9.8
AXIS TRAVERSE RATE: Z .0004-400
:MIN. INPUT & DISPLAY INCREMENT 40
AXIS TRAVERSE RATE: X .0004 - 400
:MIN. INPUT & DISPLAY INCREMENT 40
AXIS SWIVEL RATE: B 60
:MIN. & DISPLAY INCREMENT .001
WHEELHEAD:
TRAVERSE 12.6
SWIVEL RANGE, B AXIS 0-180
EXTERNAL GRINDING:
DRIVE RATING 11
WHEEL SURFACE SPEED, PROGRAMMABLE 3900.-.8900
WHEEL FLANGE TAPER REGISTER 60
GRINDING WHEEL WIDTH: 2.4/3.1/3.9
FOR POWER CHUCKING 3.9
FOR WHEEL CHANGING AID 3.9
INTERNAL GRINDING:
FREQUENCY 2000
RATING 10
SPINDLE REGISTER DIAMETER 4.7
GRINDING WHEEL DIAMETER 7
WHEEL ARBOR DIAMETER .31(.24)/.87
HEADSTOCK:
SPINDLE TORQUE 118
SPEED RANGE 1-1200
WORK CENTER REGISTER 4
TAILSTOCK:
QUILL TRAVERSE 1.6
CENTER REGISTER 4
WHEEL DRESSER ON TAILSTOCK, PROFILE LIFT:
DRESSER STATIONARY 1.6
DRESSER ROTATING 1.38/.39
GAUGING SYSTEM DIATRONIC: Z
GAUGING CAPACITY, Y AXIS .39-6.7 OR 1.57-7.87
MINIMUM INPUT INCREMENT 40
GAUGING HEAD TRAVERSE,LONGITUDINAL,W AXIS 13.4
GENERAL DATA:
TOTAL POWER CONSUMPTION 31
VOLTAGE/FREQUENCY 380/50
HYDRAULIC WORKING PRESSURE 427
COOLANT THRU OUT UDUME 58/2.8-42/7
WEIGHT,GRINDING LENGTH 1000/1750 12800/17600
PAINT FINISH TO SCHAUDT STANDARD
TWO COLORS 1015 LIGHT IVORY
5003 SAPPHIRE BLUE
