Specifications
Equipped With
GENERAL SPECIFICATIONS:
NEW APPROXIMATELY 1993
CONVEYOR
WASH, WASH, RINSE, BLOW-OFF
44'6" X 10'
GAS HEAT
304 10 GA STAINLESS STEEL
OPTIONS PURCHASED:
DECANT COOL DOWN UNIT
RECIRCULATING BLOW-OFF FAN
EXHAUST FAN IS TUBE
AXIAL
MACHINE IS TO REPEAT ITEMS 1,2,3 & 4 FOR 1 YEAR OF CONTINUOUS
WASHING (2-8 HOUR SHIFT PER DAY AT 5 WORKING DAYS PER WEEK.)
PARTS WILL BE ORIENTED IN A VERTICAL POSITION (NARROW EDGE IN
CONTACT WITH BELTING) WHILE BEING PROCESSED.
OVERALL DIMENSIONS: 62'6" L (INCLUDING THE LOAD & UNLOAD &
UNLOAD EXTENSIONS) BY 10' WIDE BY 7'6"
HIGH TO TOP OF HOUSING, 12' HIGH TO TOP OF
BLOW-OFF FAN, 3'6" LOAD & UNLOAD ELEVATION
SEQUENCE OF OPERATION:
2' LOAD STATION
2' APPROACH VESTIBULE
4' PREWASH 450 GPM 2 20 PSI 149 DEGREES F
3' DRAIN
6' WASH 160 DEGREES F 600 GPM @ 20 PSI
3' DRAIN
4' 1ST RINSE-SOFTENED WATER ONLY
3' DRAIN
4' 2ND RISE - D.I. WATER
3' DRAIN
15' BLOW OFF 200 DEGREES F 15,000 CFM @ 9" S.P.
4' VESTIBULE AND AIR GAP
6' COOL DOWN
1'6" EXIT VESTIBULE
2' UNLOAD
____________________
62'6" TOTAL
CONVEYOR SYSTEM:
THE PART TRANSFER SYSTEM WILL CONSIST OF SIX (6) INDIVIDUAL
LANES. THE SIX (6) LANES WILL RIDE ON ONE (1) COMMON 60" WIDE
STAINLESS STEEL HEAVY DUTY 1" X 1" FLATWIRE BELT.
TWO LANES REQUIRING FLIGHTS ARE TO BE FITTED WITH STAINLESS STEEL
FLIGHTS CLAMPED TO THE FLATWIRE BELT. SPROCKETS ON THE UNLOAD
END ARE TO BE MILD STEEL. THE LOAD END SPROCKETS ARE TO BE
FABRICATED FROM TYPE 304 STAINLESS STEEL.
CONVEYOR GUIDES:
EACH LANE (6) IS TO BE FITTED WITH A SET OF NON-MARRING GUIDES.
