Specifications
Equipped With
#B156-91
GENERAL SPECIFICATIONS:
SWING OVER CROSS SLIDES 9.45"
DISTANCE FROM SPINDLE END TO TURRET FACE 14.2"
CHUCK SIZE 3 JAW 6"
COLLET SIZE: ROUND BAR DIAMETER 1.50"
HEXAGON BAR, SIDE TO SIDE 1.26"
SQUARE BAR, SIDE TO SIDE 1.00"
SPINDLE AND SPEEDS
SPINDLE NOSE TYPE ASA A2-5"
HOLE THROUGH SPINDLE 2-1/16"
INSIDE DIAMETER OF DRAW TUBE 1.57"
OUTSIDE DIAMETER OF SPINDLE AT FRONT
BEARING 3.54"
SPINDLE SPEED CHANGES AUTOMATIC X MANDUAL 4 X 2
INDIVIDUAL SPINDLE SPEEDS HIGH RANGE 250-500-1250-2500 RPM
LOW RANGE 160-320-800-1600 RPM
TURRET SLIDE AND HEXAGON TURRET
NUMBER OF TOOL HOLES 6
DIAMETER OF TOOL HOLE 1"
DISTANCE ACROSS TURRET FACE 8.50"
TURRET SLIDE (RAM) TRAVEL 6.30"
RANGE OF FEED RATES INFINITELY VARIABLE 1.30 - 59.1 IPM
RAPID TRAVERSE RATE 275 IPM
CROSS SLIDES
FRONT CROSS SLIDE TRAVEL 4.92"
REAR CROSS SLIDE TRAVEL 4.92"
RANGE OF FEED RATES 1.18 - 55.1 IPM
RAPID TRAVERSE RATE 236 IPM
VERTICAL SLIDE
VERTICAL SLIDE TRAVEL 6.50"
RANGE OF FEED RATES INFINITELY VARIABLE 1.18 - 55.1 IPM
RAPID TRAVERSE RATE 236 IPM
LONGITUDINAL FEED SLIDE
LONGITUDINAL FEED SLIDE TRAVEL 1.77"
RANGE OF FEED RATES INFINITELY VARIABLE 1.18 - 39.4 IPM
RAPID TRAVERSE RATE 157.5 IPM
ELECTRIC MOTORS
SPINDLE DRIVE 2 SPEED (POLE) 5/3 HP
HYDRAULIC PUMP 3 HP
CUTTING FLUID PUMP 0.1 HP
LUBRICATING OIL PUMP 0.0004 HP
HYDRAULIC SYSTEM
NORMAL PRESSURE SETTING 284 - 426 PSI
HYDRAULIC PUMP DELIVERY DOUBLE VANE TYPE 1/586/1.586 IN
3/MIN.
OVERALL MACHINE HEIGHT 81.7"
FLOOR SPACE:
INCLUDING HYD. POWER UNIT AND CHIP TRAY 67" X 128"
MACHINE WEIGHT 7,040 LBS.
