Specifications
Equipped With
GENERAL SPECIFICATIONS:
NEW APPROXIMATELY 1989
MAXIMUM PITCH D.P. 10"
CENTER DISTANCE BETWEEN WORK SPINDLE
AND HOB .32-3.7"
MAXIMUM BLANK DIAMETER
MANUAL LOADING 6.1"
AUTOMATIC LOADING 3.15" (3.9")
MAXIMUM FACE WIDTH 7.0"
MAXIMUM LENGTH OF WORKPIECE
MANUAL LOADING 11.8"
AUTOMATIC LOADING 10.2"
MINIMUM NUMBER OF TEETH 3
MINIMUM NUMBER OF WORM STARTS 1
WORK SPINDLE THROUGH HOLE 40 MM
WORK SPINDLE ADAPTOR BORE DIAMETER 50 MM
MAXIMUM HOB DIAMETER 2.75"
MAXIMUM HOB WIDTH
SHIFTING HOB HEAD 4.1"
MAXIMUM AXIAL HOB SHIFT
SHIFTING HOB HEAD 2.75"
35 LONGITUDINAL FEEDS IN/REV
.004-.200
HOB SPEEDS (VARIABLE) 140-900 RPM
NET WEIGHT APPROXIMATE 6200 LBS.
MAIN MOTOR POWER CONSUMPTION 3.0 KW
EQUIPPED WITH:
AUTOMATIC LOAD/UNLOAD DEVICES WITH TRANSFER CENTERS (MALE &
FEMALE) AND LOADING/UNLOADING CLAWS
SKIVING CONTROLS FOR FINISHING HARDENED AND PRE-CUT GEARS
CROWNING SYSTEM
DOUBLE CUT
SHIFTING HOB HEAD
HYDRAULIC DEBURRING DEVICE
VARIABLE HOB RPM
SIGNAL LAMP & WORKPIECE COUNTER
EQUIPMENT FOR COLLET CLAMPING AND ARBOR CLAMPING
CHIP CONVEYOR
POWER FILTER
(1) HOB ARBOR (YOUR CHOICE: 8MM, 10MM, 1/2" OR 3/4")
SOLID STATE PC CONTROL
