Specifications
Equipped With
#1006-B
GENERAL SPECIFICATIONS:
NEW APPROXIMATELY 1988
FEATURES:
A. 15 HP DC DRIVE SYSTEM
15 HP WER MOTOR (460V/3P)
MOTOR MOUNTED BLOWER AND AC STARTER
TACH FEED BACK (DEGREE 1% SPEED REGULATION)
B. KOELLMANN MODEL PEZS 20 HEAVY DUTY GEAR REDUCER WITH 11.2 TO
1 REDUCTION RATIO. APPROXIMATE SCAREW SPEED RANGE OF 15 TO
150 RPM
C. 24:1 L/D BARREL
BIMETALLIC LINED BARREL (XALOY 306 OR EQUIVALENT)
(3) ZONES OF AUTOMATIC AIR COOLING
CREMAMIC HEATERS
TAP FRONT FLANGE AS FOLLOWS:
12 O'CLOCK FOR MELT PRESSURE PROBE
9 O'CLOCK FOR MELT TEMPERATURE PROBE
6 O'CLOCK FOR RUPTURE DISC
D. DYNISCO MODEL PG542 MILT PRESSURE GAUGE MOUNTED IN BARREL
E. MELT THERMOCOUPLE MOUNTED IN BARREL WITH LFE MODEL 43 DIGITAL
TEMPERATURE INDICATOR MOUNTED IN CONTROL PANEL
F. FEED SCREW
4140 TOOL STEEL
FLAME HARDENED LANDS
GROUND AND POLISHED
CHROME PLATE
G. 460V/3P/60C CONTROL PANEL MOUNTED ON BASE OF EXTRUDER,
INCLUDES:
(7) HEAT ZONES USING EUROTHERM 103 TEMPERATURE CONTROLLERS
(3) BARREL HEAT ZONES WITH AUTOMATIC AIR COOLING
(1) GATE HEAT ZONE
(3) DIE HEAT ZONE
(7) HEAT ZONE AMMETERS
MERCURY RELAYS
DC MOTOR AMMETER
DIGITAL TACHOMETER
DIGITAL MELT TEMPERATURE INDICATOR
10 TURN POT MOTOR SPEED CONTROL WITH START/STOP BUTTONS
(1) MASTERFLEX LD-40 RESTRICTOR BAR LIGHT DUTY EXTRUSION DIE
12" WIDE
.00" - .040" LIP OPENING
3/4" MANIFOLD
RESTRICTOR BAR AT 45 DEGREE ANGLE
(3) ELECTRICALLY HEATED ZONES
DIE ADAPTOR TO INTERFACE WITH EXTRUDER (1-1/2")
CHROME PLATING
DIE SUPPORT CART
(1) LABORATORY CHILL ROLL STAND INCLUDES THE FOLLOWING FEATURES:
A. 1 HP DRIVE SYSTEM
B. 7V/1000 RPM TACH FEEDBACK ON DC DRIVE (+/- 1% SPEED
REGULATION)
C. 8" DIA. X 14" WIDE DOUBLE SHELL SPIRAL BAFFLED CHROME
PLATED CHILL ROLL
D. 5" DIA. X 14" WIDE PULL ROLLS
(1) CHROME PLATE
(1) RUBBER COATED
E. 20 TO 1 RATIO GEAR BOX REDUCER WITH TIMING BELT DRIVE.
APPROXIMATE SPEED RANGE USING 1 TO 1 RATIO BELT AND
PULLEY SET IS 12 TO 114 FPM
FOR RAZOR BLADE STYLE SLITTER STATION WITH GUIDES MOUNTED ON
TAKE-OFF UNIT
(1) DUAL SHAFT TORQUE WINDER
WOLVERINE CUB FLEXOGRAPHIC PRING PRESS-STAGE COLOR
PILLAR CORONA TREATING SYSTEM WITH 500 WATT, 18 KHZ SERIES SOLID
STATE POWER SUPPLY COMPLETE WITH OUPUT TRANSFORMER
PILLAR CANISTER TYPE OZONE DISTRUCT SYSTEM, MODEL OZD 50 PER ITEM
2 POWER SUPPLY 208/9/60 UNIT TO TREATA CAST POLYETHYLENE FILM 4
MIL. THICK, 9" WIDE ON ONE SIDE TO A TREAT LEVEL OF 4 BOBYNE AT A
LINE SPEED OF 150 FT./MIN.
NOTE: 450 HOURS TOTAL TIME
