Specifications
Equipped With
#B085-92
GENERAL SPECIFICATIONS:
COLLET CHUCK CAPACITY MIN. MAX.
ROUND 1" 4-1/2"
HEXAGON 1" 3-7/8"
SQUARE 1" 3-1/8"
CHUCK CAPACITY 12" - 15"
SPINDLE
HOLE IN SPINDLE 5.250"
HOLE IN COLLET TUBE 4.750"
SPINDLE NOSE AMERICAN STANDARD 11" TYPE B-1
SPEED RANGE 12 SPEED 24 SPEED
18-750 15-750
24-1000 20-1000
29-1200 24-1200
SWING
OVER WAYS 21.250"
OVER CARRIAGE GUIDES 18.500"
OVER CARRIAGE CROSS SLIDE RECESS 13.000"
CARRIAGE
CROSS SLIDE TRAVEL 14.500"
RAPID TRVERSE 250"/MIN.
CROSS FEEDS (15) .48 TO 15.0"/MIN.
HEXAGON TURRET
DIAMETER OF TURRET BEARING ON SADDLE 16.000"
SIZE OF TURRET ACROSS FLATS 16.060"
DIAMETER OF TOOL HOLE IN FACE OF TURRET 3.125"
CENTER OF TOOL HOLE TO TOP OF SADDLE 4.760"
SIZE OF BOLT HOLES (4) IN FACE OF TURRET
LOW TYPE ONLY 11/16" X 1" B FACE
HEIGHT OF TURRET FACE: HIGH TYPE 11.200"
LOW TYPE 5.500"
MAXIMUM DISTANCE FROM END OF SPINDLE TO
FACE OF TURRET 34.0"
SADDLE TRAVEL 24.0"
FEEDS (15) .96 TO 30.0"/MIN.
BED
WIDTH ACROSS WAYS 12.500"
TOP OF WAYS TO SPINDLE CENTER 10.000"
MOTOR 40 HP 1800 RPM
APPROXIMATE WEIGHT 14,000 LBS.
