Specifications
Equipped With
GENERAL SPECIFICATIONS:
NEW APPROXIMATELY 1989
SPINDLE:
SPINDLE CONFIGURATION ANSI A2-5"
HOLE THROUGH SPINDLE 1-7/8"
ROUND 16C COLLET (THROUGH CAPACITY) 1-5/8"
HEX 16 C COLLET (THROUGH CAPACITY) 1-3/8"
16C STEP CHUCK (GRIPPING CAPACITY) 6
8" POWER JAW CHUCK CAPPACITY (GRIPPING
CAPACITY) 8
(THROUGH CAPACITY) 1-5/8
6" POWER JAW CHUCK CAPACITY (GRIPPING
CAPACITY) 6"
(THROUGH CAPACITY) 1-5/8"
AC DIGITAL SPINDLE DRIVE SYSTEM (30
MINUTE RATING) 10 HP
STANDARD DRIVE SYSTEM SPEED RANGE
(1 RPM STEPHS) 50-5000 RPM
HIGH TORQUE DRIVE SYSTEM SPEED RANGE
(1 RPM STEPS) 30-3000 RPM
MAX. ALLOWABLE WEIGHT OF SPINDLE
(INCLUDING WORKHOLDING DEVICE) 75 LBS.
CAPACITY:
MAX. SWING OVER UPPER WAY COVER 19-1/2"
MAX. SWING OVER LOWER WAY COVER 14-1/2"
PRE-LOADED BALL SCREW DIAMETER 1-1/4"
MAX. SQUARE SHANK TOOL SIZE 3/4"
MAX. ROUND SHANK TOOL SIZE UP TO 1-1/8"
MAX. DRILL SIZE UP TO 1-1/4"
MAX. X AXIS TRAVERSE RATE 472 IPM
MAZ. Z AXIS TRAVERSE RATE 630 IPM
MAX. DISTANCE FROM SPINDLE FACE TO
TURRET FACE 14"
TURRET INDEXINT TIME (STATION TO STATION) .2 SECONDS
12 STATION VERTICAL TURRET:
MAX. X AXIS TRAVEL 5-7/16"
MAX. Z AXIS TRAVEL 13-41/64"
MAX. TURNIG DIAMETER WITH STANDARD
QUALIFIED 1/4" SQUARE SHANK TOOL
(1-1/4" HEAD) 7-1/2"
HYDRAULIC TAILSTOCK:
MORSE TAPER CENTER MT. NO. 3
MAX. DISTANCE FROM SPINDLE FACE TO
TAILSTOCK FACE 17-1/2"
MAX. BETWEEN CENTERS DISTANCE 13-13/16"
MAX. TRAVEL 11-1/2"
RAPID TRAVERSE AND RETURN RATE 300 IPM
MACHINE DIMENSIONS-LENGTH 86"
LENGTH WITH END CHIP REMOVAL SYSTEM 122"
DEPTH 54"
HEIGHT 68"
EQUIPPED WITH:
FANUC QT CONTROL
PARTS CHUTE
12 STATION TURRET
LIVE CENTER
HI-ROGQUE
3 JAW POWER HOLD CHUCK
TOOLINIG
