Specifications
Equipped With
GENERAL SPECIFICATIONS:
SERIAL Y-13411
NEW APPROXIMATELY 1965
MAX. SWING, WORKHEAD PARALLEL TO
LONGITUDINAL SLIDE, WITHOUT CHUCK GUARD
AND FACING STOP 23"
SWING INSIDE CHUCK GUARD 16"
SWING, WORKHEAD SWIVELED 90 DEGREES
INSIDE GUARD 12"
SWING WITH RAISING BLOCKS (OPTIONAL) ADD 8" TO ABOVE
ANGULAR ADJUSTMENT OF WORKHEAD 0 TO 90 DEGREES
WORKHEAD TRANSVERSE POSITION RANGE 15-1/2"
WORKTABLE TRAVEL PER TURN OF HANDWHEEL .125"
MAXIMUM WHEELSLIDE TRAVEL 20"
WHEELSLIDE TRAVEL PER TURN OF HANDWHEEL 4.000"
MINIMUM GRIND TRAVERSE STROKE 1/8"
MAXIMUM GRIND TRAVERSE STROKE 16"
WHEELSPINDLE CROSS FEED TRAVEL 1-1/2"
CENTER OF WORKSPINDLE TO FLOOR 46"
WORKSPINDLE (AMERICAN STD, SPINDLE NOSE) 500 LBS. AT 6"
SPEEDS AND FEEDS:
GRINDING TRAVERSE SPEED OF WHEELSLIDE 3-25 FPM
RAPID TRAVERSE SPEED OF WHEELSLIDE (MAX.) 25 FPM
WORKSPINDLE SPEED, INFINITELY VARIABLE
BETWEEN 50-500 RPM
ONE TURN OF CROSS FEED HANDWHEEL .050 ON WORK DIA.
ONE TURN OF FINE FEED KNOB .005 ON WORK DIA.
POWER (HYDRAULIC) CROSS FEED:
IN INCREMENTS OF .00028 TO .00112
ON WORK DIA.
STROKES PER MINUTE 10 TO 150
FEED RATE (MAX.) .0028 PER SECOND ON WORK DIA.
FEED RATE (MIN.) .0005 PER SECOND WORK DIA.
MOTORS:
HYDRAULIC PUMP MOTOR 3 HP 1800 RPM
WHEEL DRIVE MOTOR 5 HP 3600 RPM
COOLANT PUMP 1/4 HP 1800 RPM
CAPACITY OF HYDRAULIC TANK 30 GALLONS
CAPACITY OF COOLANT TANK 50 GALLONS
LENGTH AND WIDTH OF BASE ON FLOOR 65-3/16" X 34"
FLOOR SPACE WITH OR WITHOUT COOLANT TANK 111" X 82-1/4"
NET WEIGHT APPROXIMATE 6,200 LBS.
