Specifications
Equipped With
GENERAL SPECIFICATIONS:
Z AXIS TRAVEL 10"
X AXIS TRAVEL 11"
JOG MODE 1-200 IPM
SINGLE STEP MODE
CENTERLINE OF SPINDLE TO SLIDE 1.375"
X SLIDE TABLE 7 X 15"
SPINDLE NOSE A-1-4
SPINDLE BORE 1.625"
SPINDLE TAPER MT 5
SPINDLE MOTOR 5 HP
SPINDLE RPM 10-3500
RAPID TRAVERSE 300 IPM
THREADING UNLIMITED
WEIGHT 2500 LBS
VOLTAGE 220/3 PH
THIS IS A QUALITY MACHINE BUILT IN CALIFORNIA USING THE BEST
PRODUCTS THAT ARE AVAILABLE. MECHANITE CASTINGS. THE LINEAR
WAYS, ABEO 7 SPINDLE BEARINGS, PRECISION BALLSCREWS, STERLING
ELECTRIC SPINDLE MOTOR, CLEVELAND SERVO MOTORS, ADVANCED MOTION
CONTROL SERFVO AMPLIFIERS, MITSUBISHI SPINDLE INVERTOR, ROYAL AIR
ACTUATED COLLET CLOSER, HALOGEN WORK LIGHT, HEAVY DUTY COOLANT
PUMP, FOOT OPERATED COLLECT CLOSER.
A PRECISION SLANT BED CHUCKER; BED SLANTED AT 30 DEGREES FOR EASY
ACCESS TO TOOLING, PARTS AND LETS CHIPS FALL AWAY FROM YOUR
TOOLING, HEAVY DUTY BASE, WITH FULL ENCLOSURE, EASY ACCESS SIDE
DOOR, SLIDING FRONT DOOR FOR EASY LOADING AND UNLOADING, REAR
PANEL COMES COMPLETELY OFF FOR COMPLETE MACHINE ACCESS, COOLANT
SYSTEM, QUICK PULL OUT CHIP DOOR. HUST 4 AXIS CNC CONTROL (A
FULL FUNCTIONING G AND M CONTROL WITH TEACH MODE. RS-232 PORT,
COMPLETE USER PANEL WITH HANDWHEEL, DIRECT DRIVE SERVO MOTORS FOR
Z AND X AXIS, 5 HP SPINDLE MOTOR, MACHINE WORK LIGHT, POWDER COAT
PAINT BAKED ON.
OPTIONS:
AIR COLLET CLOSER WITH FOOT SWITCH AND SAFETY INTERCONNECT
SINGLE BAR FEEDER
`STACK BAR FEEDER - 36 BARS
TOOLING BAR (HOLDS HARDINGE TYPE TOOL HOLDERS)
TOOL HOLDERS 2 X 2 USES 1/2" TOOLING
TOOL HOLDERS 2 X 4 USES 1/2" TOOLING
HIGH PRECISION 5" 3 JAW CHUCK WITH MOUNTING PLATE
HIGH PRECISION 5" 6 JAW CHUCK WITH MOUNTING PLATE
SBC-6 TOOLING ACCESSORIES:
1. TEE NUTS $ 1.65
2. BORING TOOL HOLDER 5/8" HOLES 112.00
3. CUT OFF AND TURNING TOOL HOLDER 1/2" TOOL 72.00
4. 2" SQ. TURNING TOOL HOLDER 1/2" TOOL 80.00
5. TOOLING PLATE FOR HARDINGE STYLE TOOLS 259.00
6. SINGLE TOOL HOLDER 30.00
7. DOUBLE TOOL HOLDER 35.00
8. TRIPLE TOOL HOLDER 45.00
9. BORING TOOL HOLDER 53.00
10. 5/8" O.D. BUSHING 1/8 TO 1/2 I.D. 18.00
11. A-1-4 BACK PLATE CAN BE USED FOR
A FACE PLATE 96.00
12. 2" X 2-1/2" X 10" TOOLING BAR WITH
9-.625 HOLES ON SPINDLE CENTERLINE
ITEM 10 IS USED IN THIS BAR FOR WHAT-
EVER SIZE DRILL THAT YOU NEED. BORING
BARS AND OD TOOLS WILL ALSO WORK IN
THIS BAR 200.00
13. BAR FEEDER'S ARE AVAILABLE
14. 6' 1,895.00
15. 12' 2,195.00
16. PNEUMATIC DRILLING ATTACHMENT
(REQUIRES ADDITIONAL SOLENOID
ACTUATED VALVE AND REGULATOR P.O.R.
17. PNEUMATIC OPERATED SPINDLE LOCKS THE `
SPINDLE IN ONE POSITION PERMITTING OTHER
FUNCTIONS SUCH AS CROSS DRILLING,
MILLING ECT.
DURING OPERATION THE COOLANT CAN BE TURNED ON AND OFF FROM THE
CONTROL PANEL ALLOWING THE OPERATOR TO OBSERVE THE CUTTING WITH
OUT OPENING THE SLIDING DOOR.
WE OFFER AN OPTION THAT PERMITS YOU TO STOP THE SPINDLE AND CLAMP
IT IN POSITION ALLOWING YOU TO DO CROSS DRILLING OR MILLING. WE
CAN SUPPLY LIVE TOOLING TO DO THIS FUNCTION
WARRANTY IS 1 YEAR ON PARTS AND LABOR
