Specifications
Equipped With
#815-N
GENERAL SPECIFICATIONS:
SWING OVER BED 30"
SWING OVER CROSS SLIDE 20-7/32"
SWING OVER GAP (IN FRONT OF FACEPLATE) 15" (13)
SUPPORT CAPACITY BETWEEN CENTERS
WITHOUT STEADY 6,500 LBS.
WITH ONE STEADY 6,600 LBS.
WITH TWO STEADIES 7,700 LBS.
HEADSTOCK
SPINDLE SPEEDS (16) 14 - 1010 RPM
SPINDLE NOSE TYPE D1-8
HEADSTOCK CENTER NO. 5 MT
HOLE THROUGH SPINDLE 4-1/8"
QUICK CHANGE GEARBOX
THREADS PER INCH (70) 1/2 - 56
METRIC THREADS (61) .5 - 56
LONGITUDINAL FEEDS (70) .0004 - .1664
CROSS FEEDS (70) .0007 - .0830
CARRIAGE & APRON
CROSS SLIDE TRAVEL 19"
COMPOUND REST TRAVEL 9.5"
CARRIAGE BEARING ON WAYS 32"
TAILSTOCK
TRAVEL OF BARREL 7.5"
DIAMETER OF BARREL 3-11/32"
TAILSTOCK CENTER NO. 5 MT
BED
WIDTH OF BED 17.750"
DEPTH OF BED 16.625"
MAIN DRIVE MOTOR 15 HP
DIMENSIONS 67-1/8" H X 50" W
WEIGHT 12,000 LBS.
STANDARD EQUIPMENT
HARDENED AND PRECISION GROUND BEDWAYS
EXTREMELY WIDE BEDWAYS
HEAVILY RIBBED CLOSED GRAIN CAST BED
DRIVE PLATE
OFF-SET TYPE TAILSTOCK HANDWHEEL
AUTOMATIC LUBRICATION OF GEARBOX, APRON, AND CARRIAGE
SAFETY CLUTCH IN CARRIAGE APRON
GAP BED
LEVER THRU INCH/METRIC (MODULE & DIAMETRAL) THREADS
D1-8 CAMLOCK SPINDLE NOSE
DUAL APRON AND HEADSTOCK CLUTCH CONTROL
ROLL OUT CHIP PAN
