Specifications
Equipped With
THIS IS A DEMO 19" LATHE THAT HAS A SLIGHT EXTERNAL CRACK IN THE
CASTING WHERE THE ELECTRICAL CABINET ATTACHES. THE CRACK WILL IN
NO AFFECT THE PERFORMANCE, DURABILITY OR LONGEVITY OF THIS
MACHINE. SUMMIT WILL WARRANT IT FOR A FULL 6 MONTHS.
GENERAL SPECIFICATIONS:
CAPACITIES:
SWING OVER BED 19"
SWING OVER GAP 27"
SWING OVER CROSS SLIDE 10-3/4"
LENGTH OF GAP 15-3/8"
LENGTH OF GAP IN FRONT OF FACE PLATE 10-1/2"
HEADSTOCK:
SPINDLE SPEEDS (12) 22-1500 RPM
HOLE THROUGH SPINDLE 4-1/8"
QUICK CHANGE GEARBOX:
THREADS PER INCH (56) 3/4-92
METRIC THREADS (35) .25-23
CROSS FEEDS (56) .0004-.056 IPR
LONGITUDINAL FEED (56) .0009-.112 IPR
METRIC FEED (56) .0235-2.84 MM/REV.
POWER
WORKPIECE WITHOUT STEADY 4,400 LBS.
WORKPIECE WITH STEADY 5,500 LBS.
DIMENSIONS 60" H X 46" W X 144"L
WEIGHT 6,800 LBS.
FEATURES:
HEAVILY RIBBED CAST IRON BED AND BASE
HARDENED AND GROUND INSERTED WAYS
FORCED LUBRICATION HEADSTOCK CARRIAGE AND BEDWAYS
D1-8 CAMLOCK SPINDLE NOSE
DUAL HEADSTOCK AND APRON SPINDLE CONTROL LEVER
INCH-METRIC THREADING
REMOVABLE GAP
PULL OUT CHIP PAN
DISC BRAKE SPINDLE STOP
CROSSFEED: THREADING SAFETY INTERLOCK
DIAMETRICAL MODULE THREAD CAPACITY
220/440 VOLT, 3 PHASE 60 CYCLE
HUGE 4-1/8" SPINDLE BORE
ACCESSORY PACKAGE:
THREAD DIAL
STEADY REST
FOLLOW REST
TURRET CARRIAGE STOP
12" 3 JAW CHUCK
17" 4 JAW CHUCK
COOLANT SYSTEM
TAPER ATTACHMENT
