Specifications
Equipped With
#98064-3
GENERAL SPECIFICATIONS:
SERIAL 2771
NEW APPROXIMATELY 1979
SWING OVER BED 17-3/4"
SWING IN GAP 25-3/4"
SWING OVER CROSS SLIDE 10"
LENGTH IN GAP (FROM SPINDLE NOSE) 9-1/2"
DISTANCE BETWEEN CENTERS 60"
SPINDLE SPEEDS (14) 18-1600 RPM
HOLE THROUGH SPINDLE (INTERNAL NOSE TAPER) 2-1/16" MT6
STANDARD SPINDLE NOSE-CAMLOCK TYPE AMERICAN D1-6
42 FEEDS: LONGITUDINAL .0017 - .126 IPR
CROSS .0008 - .063 IPR
34 METRIC THREADS .5 TO 28MM/REV.
42 INCH THREADS 3/4 - 56 TPI
CROSS SLIDE TRAVEL 10-1/2"
TOP SLIDE TRAVEL 5"
CARRIAGE LENGTH (BEARING ON BEDWAYS) 20-1/4"
CARRIAGE BRIDGE WIDTH 8-1/2"
QUILL DIAMETER 3"
QUILL TRAVEL 7"
QUILL TAPER NO. 5 MT
MAIN DRIVE MOTOR 7-1/2 HP
WIDTH OF BED 13-1/2"
EQUIPPED WITH:
3 JAW CHUCK 12"
TOOLPOST
TRAVA DIAL
TAPER ATTACHMENT
WORK LIGHT
COOLANT SYSTEM
FACE PLATE
ADAPTOR PLATE
4 JAW CHUCK 12"
