18" x 48", CINCINNATI, 1970, SWING DOWN INTERNAL, LIVE/DEAD WORKHEAD, STEADY

GENERAL SPECIFICATIONS:
SERIAL 35326E5V-0019
NEW APPROXIMATELY 1970
MAXIMUM SWING OVER BED 19"
DISTANCE BETWEEN CENTERS 48"
GRINDING DIAMETER MINIMUM 0"
MAXIMUM 19"
WORKHEAD SPEEDS 25 TO 225 RPM
AUTOMATIC INFEED .0004 TO .014 IPR
LONGITUDINAL TABLE FEEDS (INFINITE) 3 TO 220 IPM
GRINDING WHEEL 18" X 1" X 5"
HEADSTOCK SWIVEL FORWARD 90 DEGREES
HEADSTOCK SWIVEL BACK 30 DEGREES
TABLE SWIVEL TAPER FORWARD 3" TPF
TABLE SWIVEL ANGLE FORWARD 7 DEGREES
TABLE SWIVEL ANGLE BACK 2 DEGREES
INTERNAL GRINDING SPINDLE ATTACHMENT (SWING-DOWN TYPE)
HYDRAULIC LONGITUDINAL TABLE FEED
RIGHT AND LEFT TARRY
BUILT IN COOLANT SYSTEM
GRINDING WHEELHEAD SPINDLE MOTOR 5 HP