Specifications
Equipped With
#92125-6
GENERAL SPECIFICATIONS:
SERIAL 204
NEW APPROXIMATELY 1967
AREA HEAD 19" X 30"
RANGE:
OVERALL HEIGHT OF MACHINE 134"
HEIGHT OF WORKING SURFACE OF BASE 9"
SIZE OF WORKING SURFACE OF STANDARD BASE 30.50" L-R
34.50" F-B
HEIGHT OF WORKING SURFACE OF ADJ. TABLE 16" MIN.
28" MAX.
SIZE OF WORKING SURFACE OF ADJ. TABLE 34" L;-R
30" F-B
DISTANCE BETWEEN T SLOTS 18"
DISTANCE HAD FLANGE TO BASE MAX. 62.75"
MIN. 44.75"
DISTANCE HEAD FLANGE TO ADJ. TABLE MAX. 46.75"
MIN. 16.75"
CENTER OF HEAD DRIVE SHAFT TO FACE OF WAYS 12.80"
CENTER OF HEAD FLANGE TO FACE OF WAYS 14.80"
TRAVEL OF HEAD (STANDARD STROKE) 18"
SIZE OF WAYS ON COLUMN 12" W X 3.38" X 125"
SPINDLES:
SIZE OF SPINDLE DRIVES (SLEEVES) (16) 1.5" DIA.
MAXIMUM SPINDLE DIAMETER 1.63"
FEED:
STANDARD FEED STROKE (MAX.) 18"
MAXIMUM FEEDING PRESSURE 8,200 LBS.
RANGE OF FEEDING RATE 1"-31" PER MIN.
RANGE OF TRAVERSE RATE PER MIN. 223" FOR 274" REV.
FLOOR SPACE AND WEIGHTS:
FLOOR SPACE REQUIRED 58" L-R
84" F-B
WEIGHT 12,000 LBS.
MOTOR FOR HEAD 10 HP 1800 RPM
HYDRAULIC PUMP MOTOR 3 HP 1800 RPM
DRILLING CAPACITY:
DRILLING CAST IRON (UP TO 170 BR.) NUMBER
& DIA. DRILLS @ 70'/MIN. 16 - .562 DIA.
SPEED & FEED PER REV 365 RPM - .0088
DRILLING MILD STEEL @ 50' MIN. NUMBER
& DIA. DRILLS 12 - .500 DIA.
SPEED & FEED PER REV 390 RPM- .0064
TAPPING CAPACITY
TAPPING CAST IRON (UP TO 170 BR.) @
35'/MIN. 75% THD. 11 - .625 X 11
TAPPING MILD STEEL @ 20'/MIN. 75% THD. 12 - .500 X 13
SPINDLE SPEED (LOW SPEED NECK) 291-890
(HIGH SPEED NECK) 684-2082
INDEXING TABLE
