Specifications
Equipped With
#92126-6
SPECIFICATIONS:
SERIAL 844
NEW APPROXIMATELY 1947
RANGE:
OVERALL HEIGHT OF MACHINE 139"
HEIGHT WORKING SURFACE ADJ. TABLE. MAX. 35-1/2"
MIN. 23-1/2"
SIZE OF WORKING SURFACE ADJ. TABLE 32" L-R
22" F-B
HEIGHT OF WORKING SURFACE OF LOW BASE 7-1/2"
SIZE OF WORKING SURFACE OF LOW BASE
(SMALL SIZE) 36" L-R
20" F-B
(LARGE SIZE) 36" L-R
32" F-B
DISTANCE FROM BOTTOM HEAD FLANGE TO
WORKING SURFACE OF ADJ. TABLE MAX. 46-3/4"
MIN. 16-3/4"
DISTANCE FROM BOTTOM HEAD FLANGE TO
WORKING SURFACE OF BASE MAX. 62-3/4"
MIN. 44-3/4"
CENTER OF DRIVE SHAFT TO FACE OF WAYS
ON COLUMN 10"
CENTER OF HEAD TO FACE OF WAYS ON COLUMN 12"
TRAVEL OF HEAD STANDARD 18"
SIZE OF WAYS ON COLUMN 12" X 17/64"
SPINDLES:
NUMBER OF SPINDLES 16
SIZE OF UPPERJOINTS 5/8", 7/8", 1-1/8"
1-3/8". 1-5/8"
FEEDS:
RANGE OF FEEDING RATE, INCHES PER MIN. 1"-10"
RAPID TRAVERSE RATE, INCHES PER MIN. 215"
MAXIMUM STANDARD FEEDING PRESSURE 5,000 LBS.
DIAMETER OF HYDRAULIC FEEDING CYLINDER 3-1/2"
STANDARD STROKE OF HEAD 18"
FLOOR SPACE AND WEIGHTS
FLOOR SPACE REQUIRED 64" L-R
79" F-B
WEIGHT 9000 LBS.
MOTOR 7-1/2 HP
1200 RPM
SPINDLE SPEED (LOW SPEED NECK) 121-219
(HIGH SPEED NECK) 302-550
DRILLING CAPACITIES:
MULTIPLE DRILL MILD STEEL @ 60' PER MIN.
NUMBER & DIA. DRILLS 10 - 3/8"
SPEED 611 RPM
FEED PER REVOLUTION .0045"
MULTIPLE DRILLING CAST IRON @ 70' PER MIN.
NUMBER & DIA. DRILLS 10 - 1/2"
SPEED 535 RPM
FEED PER REVOLUTION .0074"
