Specifications
Equipped With
GENERAL SPECIFICATIONS:
CLAMPING UNIT:
TYPE FIVE POINT DOUBLE
TOGGLE CLAMP
CLAMP FORCE 276 TONS
CLAMP STROKE MAXIMUM 21.65"
OPEN DAYLIGHT MAXIMUM 46.28"
CLOSED DAYLIGHT MINIMUM 9.84"
MAXIMUM 23.02"
PLATEN DIMENSIONS HORIZONTAL 35.43"
VERTICAL 35.43"
PLATEN BOLTING PATTERN SPI
DISTANCE BETWEEN TIE RODS HORIZONTAL 22.83"
VERTICAL 22.83"
TIE ROD DIAMETER 4.53"
EJECTOR KNOCK OUT TYPE AND PLATEN HYDRAULIC/SPI
FORCE 7.39 TONS
STROKE 5.51"
NOZZLE PENETRATION 1.18"
INJECTION UNIT:
TYPE RECIPROCATING SCREW
INJECTION CAPACITY-CALC 31.85 CU./IN
INJECTION CAPACITY-CALC G.P.P.S 16.75 OZ/GM
INJECTION PRESSURE MAXIMUM (PSL.BAR) 27180
INJ. RATE AT MAX. PRESSURE 14.83 CU./IN.
INJECTION STROKE 5.66"
SCREW DIAMETER 2.17"
SCREW L/D RATIO 20
PLASTICIZING CAP. LBS./HR. 326
SCREW SPEED RANGE 220 RPM
TORQUE 1062
PLASTICIZING CAP (LBS./HR. 252
SCREW SPEED RANGE 180 RPM
TORQUE 1291
INJECTION CARRIAGE TRAVEL 1969"/MIN.
MAX. NOZZLE CONTACT FORCE 16.5 TONS
HYDRAULICS:
OIL RESERVOIR CAPACITY 82 GALS
ELECTRICS:
VOLTAGE MOTORS FOR US MACHINES 460/3/60
VOLTAGE HEATING 230V/3/60
NUMBER OF ELECTRIC MOTORS 1
TOTAL DRIVE POWER 41
TOTAL HEATING WATTAGE 15.6
NUMBER OF HEAT CONTROL/ZONES 5
NUMBER OF PYROMETERS 1+4
MACHINE DIMENSIONS:
LENGTH 25'1"
WIDTH 4'5"
HEIGHT 7'1"
WEIGHT 28330 LBS.
