Specifications
Equipped With
GENEAL SPECIFICATIONS:
CAPACITY MILD STEEL 1/4" AT 10'
*RECOMMENDED MINIMUM CAPACITY 18 GA.
RAKE IN/FT. .34
HEIGHT 83"
WIDTH 147"
DEPTH WITH BACK GAUGE 85"
NUMBER OF HOLD DOWNS 11
BLADE SIZE 1" X 3"
WEIGHT 16,000 LBS.
HORSEPOWER 15
**STROKES/MIN. FULL WIDTH 14
* NOTE: THINNER MATERIAL MAY BE SHEARED WITH SHARP BLADES AND
CAREFUL BLADE SETTING OR WITH OPTIONAL POWER BLADE
CLEARANCE
** NARROW WIDTH CUTS WILL INCREASE STROKES/MINUTE
EQUIPPED WITH:
HYDRA-MECHANICAL POSITIVE RAM DRIVE
HEAVY DUTY 36" 2 SPEED BACK GAUGE
QUARTZ SHADOW LIGHT
PREMIUM 4 EDGE CHROME ALLOY BLADES
24" SQUARING ARM AND SCALE
JIC TYPE ELECTRICS
DEPTH CONTROL SETTING
COMPLETE HYDRAULICS AND ELECTRICS
SHADOW LIGHT
OPTIONS:
230-3-60 ELECTRICS ATE STANDARD - 460-3-60
OPTIONAL AT NO CHARGE HIGH SPEED HYDRULICS:
FOR AS250-10 30 H.P. 25 STROKES/MIN. $ 1,800.00
FOR AS250-12 30 H.P. 21 STROKES/MIN. 1,300.00
4' EXTENSION SQUARING ARM W/SCALE 450.00
8' EXTENSION SQUARING ARM W/SCALE AND
SUPPORT LEG 950.00
CENTRAL LUBE-LEVER OPERATED 1,800.00
CENTRAL LUBE-AUTOMATIC-AIR POWERED 2,540.00
HAND CLEARANCE SLOTS (2) MILLED IN
FLAT TABLE 250.00
T-SLOTS (5/8) MILLED IN FLAT TABLE
PERPINDICULAR TO BLADE 150.00 EA.
FRONT EDGE OF TABLE MILLED FLAT WITH
5/8 T-SLOT 600.00
EXTRA TABLE SECTIONS FOR (ST) MODELS 50.00 EA.
TWO HAND CONTROL STATION WITH LOCKING
SELECTOR 340.00
QUICK CHANGE BLADE CLEARANCE-LEVER
OPERATED (NORMAL EQUIPMENT INCLUDING
SET SCREW ADJUSTMENT) 4,600.00
SWING AWAY BACKSTOPP FOR SHEARING LONGER
DROP-OFF 600.00
TRANSFER BALL MOUNTED ON BRACKET 160.00 EA.
24" ARM WITH TRANSFER BALL 240.00 EA.
24" ARM WITH 5/8 T-SLOT AND SUPPORT LEG 280.00 EA.
48" ARM WITH 5/8 T-SLOT OR DISAPPEARING
STOP WILL ACCCEPT T-NUTS OR DISAPPEARING
STOP 550.00 EA.
DISAPPEARING STOP FOR ABOVE 130.00 EA.
HCHC BLADE IN LIEU OF NORMAL SHOCK
RESISTANT FOR 1/4 OR 3/8 X 10' 400.00 PAIR
FOR 1/4 OR 3/8 X 12' 450.00 PAIR
MAGNETIC SHEET SUPPORTS- 10 GA. CAPACITY
FOR 36" BACKGAGE - 10' SHEAR INSTALLED 4,620.00
FOR 36" BACKGAGE - 12' SHEAR INSTALLED 5,460.00
48" RANGE BACKGAGE INSTEAD OF 36" RANGE
1/4 AND 3/8 SHEARS 900.00
1/2 AND LARGER SHEARS 1,500.00
URETHANE PADS FOR HOLD DOWN CYLINDERS
MUST BE PURCHASED AT TIME OF MANUFACTURE
10' SHEAR 600.00 SET
12' SHEAR 750.00 SET
EXTRA PADS (10 MINIMUM) 20.00 EA.
ALSO AVAILABLE:
SHEAR CONVEYORS
ROLLER/ARM STYLE SHEET SUPPORT
CNC FRONT GAUGE SYSTEM
SAFETY EQUIPMENT TO YOUR SPECIFICATIONS
ADDITIONAL SIZES OF SHEARS
ACCESSORIES TO YOUR REQUIREMENT
