LAGUN FTV-2-S-E, PROTOTRAK PLUS CONTROL, 3 AXIS DRO W/ CANNED CYCLES ON X,Y, POWER DRAW BAR, 3 HP, 10 X 50 TABLE, 1988
LAGUN FTV-2-S-E, PROTOTRAK PLUS CONTROL, 3 AXIS DRO W/ CANNED CYCLES ON X,Y, POWER DRAW BAR, 3 HP, 10 X 50 TABLE, 1988
LAGUN FTV-2-S-E, PROTOTRAK PLUS CONTROL, 3 AXIS DRO W/ CANNED CYCLES ON X,Y, POWER DRAW BAR, 3 HP, 10 X 50 TABLE, 1988
LAGUN FTV-2-S-E, PROTOTRAK PLUS CONTROL, 3 AXIS DRO W/ CANNED CYCLES ON X,Y, POWER DRAW BAR, 3 HP, 10 X 50 TABLE, 1988
LAGUN FTV-2-S-E, PROTOTRAK PLUS CONTROL, 3 AXIS DRO W/ CANNED CYCLES ON X,Y, POWER DRAW BAR, 3 HP, 10 X 50 TABLE, 1988
LAGUN FTV-2-S-E, PROTOTRAK PLUS CONTROL, 3 AXIS DRO W/ CANNED CYCLES ON X,Y, POWER DRAW BAR, 3 HP, 10 X 50 TABLE, 1988
  • LAGUN FTV-2-S-E, PROTOTRAK PLUS CONTROL, 3 AXIS DRO W/ CANNED CYCLES ON X,Y, POWER DRAW BAR, 3 HP, 10 X 50 TABLE, 1988
  • LAGUN FTV-2-S-E, PROTOTRAK PLUS CONTROL, 3 AXIS DRO W/ CANNED CYCLES ON X,Y, POWER DRAW BAR, 3 HP, 10 X 50 TABLE, 1988
  • LAGUN FTV-2-S-E, PROTOTRAK PLUS CONTROL, 3 AXIS DRO W/ CANNED CYCLES ON X,Y, POWER DRAW BAR, 3 HP, 10 X 50 TABLE, 1988
  • LAGUN FTV-2-S-E, PROTOTRAK PLUS CONTROL, 3 AXIS DRO W/ CANNED CYCLES ON X,Y, POWER DRAW BAR, 3 HP, 10 X 50 TABLE, 1988
  • LAGUN FTV-2-S-E, PROTOTRAK PLUS CONTROL, 3 AXIS DRO W/ CANNED CYCLES ON X,Y, POWER DRAW BAR, 3 HP, 10 X 50 TABLE, 1988
  • LAGUN FTV-2-S-E, PROTOTRAK PLUS CONTROL, 3 AXIS DRO W/ CANNED CYCLES ON X,Y, POWER DRAW BAR, 3 HP, 10 X 50 TABLE, 1988

LAGUN FTV-2-S-E, PROTOTRAK PLUS CONTROL, 3 AXIS DRO W/ CANNED CYCLES ON X,Y, POWER DRAW BAR, 3 HP, 10 X 50 TABLE, 1988

Brand
LAGUN

Model
FTV-2SE

Type
Millers, Vertical

Stock #
10093

Condition
Used

Year
1988

Request a Quote

Specifications

Equipped With

GENERAL SPECIFICATIONS:

MAKE............................ LAGUN
MODEL........................... FTV-2-S-E
SERIAL NUMBER................... SE-27711
AGE (APPROX).................... 1988
TABLE SIZE...................... 10" X 50"
TRAVELS......................... 15" X 36"
SPINDLE MOTOR................... 3 HP
SPINDLE TAPER................... R8
QUILL TRAVEL.................... 5"
SPINDLE SPEED................... 70 TO 4200 RPM
CURRENTLY WIRED VOLTAGE......... 440 VOLT 

EQUIPPED WITH:
PROTOTRAK PLUS CNC CONTROL
3 AXIS DRO
KURT POWER DRAW BAR
VICE AND COLLETS

SPECIFICATIONS SUBJECT TO VERIFICATION

Wisconsin Metalworking Machinery, Inc.

2207 S. West Ave.
Waukesha, WI 53189

P: 262.548.6080
E: sales@wismet.com

Machine Hub Inventory Management
Machinery Dealers National Association
Association of Machinery and Equipment Appraisers

© 2025 Wisconsin Metalworking Machinery, Inc.