Specifications
Equipped With
#94113-6
GENERAL SPECIFICATIONS:
SERIAL HRGC3006-10-B79
DRILLING CAPACITY:
DRILLING MILD STEEL (SAE 1020) 60 SPM
2-1/2" FEED PER MINUTE (18) 9/16 DRILLS
(10) 25/32 DRILLS
(8 ) 7/8 DRILLS
DRILLING GRAY CAST IRON 70 SFM-
4" PER MINUTE (18) 1/2 DRILLS
(10) 25/32 DRILLS
(7 ) 1 DRILLS
TAPPING CAPACITY:
TAPPING MILD STEEL (SAE 1020)
(18) 3/8-24 N.F.
(12) 9/16 N.R.
(6 ) 1"-12 N.R.
TAPPING GRAY CAST IRON (18) 1/2-13 N.C.
(10) 5/8-11 N.C.
(7 ) 7/8- 9 N.C.
SPINDLE SPEEDS 173-561 RPM
RANGE:
FLOOR TO BOTTOM OF HEAD FLANGE 64"
FEED STROKE OF TABLE 6"
DISTANCE BETWEEN HEAD FLANGE AND TABLE
TOP MAXIMUM 28"
MINIMUM 14"
NUMBER OF SPINDLE DRIVES 18
WORKING SURFACE OF TABLE 19-3/4" F-B
29-1/2" L-R
BACK EDGE OF WORKING SURFACE TABLE TOP
TO FACE OF WAYS ON COLUMN 1-1/2"
OVERALL TABLE SIZE 25" F-B X 37-1/2" L-R
DISTANCE BETWEEN "T" SLOTS, CENTER
TO CENTER, TABLE TOP 17-1/4"
FEEDS:
STANDARD FEEDING STROKE 6"
MAXIMUM FEEDING PRESSURE 9000 LBS.
RANGE OF FEEDING, RATES, INCHES PER MIN. 0" TO 90"
RAPID TRAVERSE RATE INCHES PER MIN. 120"
MOTORS:
HEAD DRIVE MOTOR 10 HP 900 RPM
HYDRAULIC PUMP MOTOR 3 HP 1800 RPM
FLOOR SPACE 46" F-B X 58" L-R
HEIGHT OF MACHINE APPROXIMATELY 110-1/2"
WEIGHT 4400 LBS.
