Specifications
Equipped With
SPECIFICATIONS:
CAPACITIES:
SWING OVER BED 14-1/2"
SWING OVER CROSS SLIDE 8"
SWING OVER GAP 21-1/4"
LENGTH OF GAP 8-3/4"
LENGTH OF GAP IN FRONT OF FACE PLATE 6"
DISTANCE BETWEEN CENTERS 40"
HEADSTOCK:
SPINDLE SPEEDS (16) 19-1800 RPM
HOLE THRU SPINDLE 2"
SPINDLE NOSE TYPE D16
HEADSTOCK CENTER NO. 5 MT
NUMBER OF BEARINGS ON SPINDLE 3
TYPE OF BEARINGS ON SPINDLE 2 TAPER ROLLER
1 STRAIGHT ROLLER
QUICKCHANGE GEARBOX:
THREADS PER INCH (36) 1-3/4 TO 80
METRIC THREADS (30) .45 TO 20
MODULE THREADS (24) .25 TO 10
DIAMETRAL PITCH (30) 3.5 TO 160
LONG. FEEDS (23) .001 TO .066
CROSS FEEDS (23) .0005 TO .033
METRIC FEEDS (23) .001 TO .090
LEADSCREW-DIAMETER/PITCH (1-1/4") 4 T.P.I.
FEED ROD DIAMETER .850"
LUBRICATION SYSTEM OIL BATH
CARRIAGE & APRON:
CROSS SLIDE TRAVEL 10-1/4"
CROSS SLIDE DEPTH OF BRIDGE 4"
CROSS SLIDE WIDTH OF BRIDGE 7"
COMPOUND REST WIDTH 5-1/2"
COMPOUND REST WIDTH 5"
LENGTH OF CARRIAGE BEARING ON WAY 18"
GRADUATION OF APRON HANDWHEEL .040"
TRAVEL OF CARRIAGE PER REV. OF HANDWHEEL 5/8"
GRADUATIONS OF CARRIAGE CROSS SLIDE
HANDWHEEL (DIRECT READING) .001"
TRAVEL OF CROSS SLIDE PER REV. OF HANDWEEL .200
HEIGHT FROM TOP OF COMPOUND TO CENTERLINE
OF LATHE 1.6"
TYPE OF LUBRICATION SYSTEM OIL BATH
TAILSTOCK:
TRAVEL OF SPINDLE BARREL 4-3/4"
DIAMETER OF SPINDLE BARREL 2-1/8"
TAPER OF CENTER NO. 4 MT
LENGTH OF BARREL GRADUATIONS ON SPINDLE 4"
TYPE OF CLAMPING ON BED BOLTS & LEVER CLAMP
TYPE OF LUBRICATION SYSTEM OIL ZERKS
BED:
WIDTH OF BED 13"
DEPTH OF BED 15"
HARDNESS OF BED (ROCKWELL C) 45 TO 50
HEADSTOCK DRIVE & MOTORS:
TYPE OF INPUT DRIVE VEE BELT
NUMBER OF VEE BELTS 3
MAIN DRIVE MOTOR 5/7.5 HP
COOLANT PUMP MOTOR 1/8 HP
MISCELLANEOUS:
STEADY REST MIN. TO MAX. CAPACITY 3/8" TO 3-1/2"
FOLLOW REST MIN. TO MAX. CAPACITY 3/8" TO 3-1/2"
FACE PLATE DIAMETER 20"
CENTERLINE HEIGHT ABOVE FLOOR 42-5/8"
SHIPPING DATA:
OVERALL WIDTH 42"
OVERALL HEIGHT 54"
OVERALL LENGTH 90"
OVERALL WEIGHT 3,500 LBS.
STANDARD FEATURES:
HARDENED AND GROUND BEDWAYS
QUICK CHANGE GEARBOX
ALL SHAFTS AND GEARS ARE CHROME NICKEL STEEL, HARDENED AND GROUND
CHROME ALLOY SPINDLE WITH PRECISION ANTI-FRICTION TAPERED ROLLER
BEARINGS
AUTOMATIC LUBRICATION TO HEADSTOCK, CARRIAGE, AND BEDWAYS
D1-6 CAMLOCK SPINDLE NOSE WITH 2" DIAMETER THRU HOLE
FOOTBRAKE
7.5 HP, 220 VOLT, 3 PHASE, 60 CYCLE MOTOR
LOW VOLTAGE CONTROLS
DOG PLATE
TWO MORSE TAPERED CENTERS WITH REDUCTION SLEEVE
ACCESSORIES:
THREAD DIAL
STEADY REST
FOLLOW REST
4 WAY TOOLPOST
3 JAW CHUCK
4 JAW CHUCK
FACE PLATE
CARRIAGE STOP
WORK LIGHT
COOLANT SYSTEM
FULL LENGTH SPLASH GUARD
PRICE F.O.B. FACTOR $9,450.00
OPTIONAL EQUIPMENT:
8" 3 JAW CHUCK WITH TOP 2 PC. REV. JAWS $ 850.00
IN LIEU OF STANDARD
QUICK CHANGE TOOL POST $ 850.00
TAPER ATTACHMENT $ 750.00
ELECTRONIC DRO $2,500.00
440 VOLTS $ 750.00
