Specifications
Equipped With
GENERAL SPECIFICATIONS:
NEW APPROXIMATELY 1991
WORKHEAD:
SWIVEL OF WORKHEAD 360 DEGREES
SWING OVER TABLE 10.6"
GRINDING LENGTH BETWEEN CENTERS 20"
MAX. DIA. GROUND WITH NEW WHEEL 6"
WORKHEAD SPEEDS (6) 46 - 360 RPM
WORK TABLE:
MAX. LONGITUDINAL TRAVERSE (MANUAL) 25"
MAX. LONGITUDINAL TRAVERSE (HYDRAULIC) 24.4"
MIN. LONGITUDINAL TRAVERSE (HYDRAULIC) 0.3"
AUTOMATIC LONGITUDINAL TRAVERSE 2 TO 157 IPM
TABLE SWIVEL FORWARD 5 DEG.
BACK 11 DEG.
WHEELHEAD:
SWIVEL OF WHEELHEAD 30 DEGREES EACH
DIRECTION
MAX. TRAVERSE ON SCREW 6.3"
SPINDLE SPEEDS (2) 1660 & 1880 RPM
STANDARD GRINDING WHEEL SIZE 14" X 1-1/4" X 6"
GRINDING WHEEL THICKNESS RANGE 1" - 2"
MOTOR 5 HP
INTERNAL GRINDING SPINDLE:
INTERNAL GRINDING RANGE .59" - 3.15" DIA.
SPINDLE SPEED 18,000 RPM
MOTOR 1 HP
GRINDING CAPACITY: (DIA. X MAX. DEPTH) .78" TO 1.96" X 2.36"
1.38" TO 3.15" X
3.54"
EQUIPPED WITH:
SWING DOWN ID ATTACHMENT
AUTOMATIC PLUNGE FEED - ROUGHING AND FINISHING RANGE
AUTOMATIC INCREMENTAL INFEED
SPARK OUT TIMER
6 JAW CHUCK
SPINDLE CHILLER
UNIVERSAL TABLE
LOW USAGE
