Specifications
Equipped With
#1044-B
GENERAL SPECIFICATIONS:
NEW APPROXIMATELY 1952
CAPACITIES:
SWING OVER TABLE WORKHEAD PARALLEDL TO
TO TABLE ON CENTER 30"
SWING OVER WORKHEAD SLIDE-HEAD AT 90
DEGREES 20" DIA.
SWING INSIDE OF STANDARD CHUCK GUARD 18" DIA.
ANGULAR ADJUSTMENT OF WORKHEAD (MAX.) 90 DEGREES
TRAVEL WORKHEAD CROSS SLIDE FRONT 6" MAX.
REAR 15" MAX.
MAXIMUM LENGTH OF HOLE THAT CAN BE GROUND 14"
MAXIMUM DIAMETER HOLE THAT CAN BE GROUND 21-3/4"
TOTAL TABLE TRAVEL 21-3/4"
MAXIMUM THICKNESS OF WORK AND FIXTURE WITH
WORKHEAD SWIVELED USING 3" GRINDING WHEEL 15"
CENTER OF CHUCK SPINDLE FROM FLOOR 48"
DIAMETER OF WORKHEAD SPINDLE FLANGE 9-5/8"
DISTANCE FROM FACE OF SPINDLE FLANGE TO
SWIVEL POINT UNDER WORKHEAD 4-1/8"
SPEEDS AND FEEDS:
WORKHEAAD SPEEDS UNLIMITED BETWEEN
(INFINITELY VARIABLE) 40-350 RPM
TABLE SPEEDS FOR GRINDING UNLIMITED BETWEEN 0-15 FPM
RAPID TRAVERSE OF TABLE 35 FPM
ONE TURN OF CROSS FEED HANDWHEEL .050" DIA.
ROUGHING CROSS FEED ADJUSTABLE .0001" DIA.
.0006" DIA.
FINISHING CROSS FEED .0001" DIA.
ONE TURN OF WORKSLIDE HANDWHEEL 0100"
DRIVE:
PUMP MOTOR 60 CYCLE A.C. 2 HP 1800 RPM
WORKHEAD MOTOR, D.C. 3/4 HP 1750 RPM
WHEELHEAD MOTOR, 60 CYCLE A.C. 5 HP 3600 RPM
COOLANT PUMP MOTOR, 60 CYCLES A.C. 1/2 HP 1800 RPM
GENERAL DATA:
CAPACITY OF OIL TANK 15 GAL.
CAPACITY OF COOLANT TANK 55 GAL.
LENGTH AND WIDTH OF BASE ON FLOOR 78-1/4" X 28-1/8"
FLOOR SPACE (TOTAL) 123" X 101"
WEIGHT OF MACHINE APPROXIMATELY 8850 LBS.
EQUIPPED WITH:
CROSS SLIDING WORKHEAD
18-3/4" DIAMETER FACE PLATE
SWIVEL ON WORKHEAD
ALL ELECTRICS AND CONTROLS
NO RED HEADS
