Specifications
Equipped With
GENERAL SPECIFICATIONS:
SPECIFICATIONS:
SWING OVER BED 30"
SWING OVER CROSS SLIDE 23-1/2"
SWING OVER GAP 43"
LENGTH OF GAP 19-1/4"
SUPPORT CAPACITY BETWEEN CENTERS:
WITHOUT STEADY 6,500 LBS.
WITH ONE STEADY 6,600 LBS.
WITH TWO STEADIES 7,700 LBS.
HEADSTOCK:
SPINDLE SPEEDS (16) 14-1010 RPM
SPINDLE NOSE TYPE D1-8
HEADSTOCK CENTER NO. 5 MT
HOLE THROUGH SPINDLE 4-1/8"
QUICK CHANGE GEARBOX:
THREADS PER INCH (70) 1/2 - 56
METRIC THREADS (61) .5-56
LONGITUDINAL FEEDS .0004-.1664
CROSS FEEDS (70) .0007-.0830
CARRIAGE & APRON:
CROSS SLIDE TRAVEL 19"
COMPOUND REST TRAVEL 11-1/4"
CARRIAGE BEARING ON WAYS 32"
TAILSTOCK:
TRAVEL OF BARREL 7.5
DIAMETER OF BARREL 3-11/32"
TAILSTOCK CENTER NO. 5 MT
BED:
WIDTH OF BED 17.750"
DEPTH OF BED 16.625"
MAIN DRIVE MOTOR 15 HP
DIMENSIONS 67-1/8" H X 50" W
WEIGHT 13,600 LBS.
STANDARD EQUIPMENT:
HARDENED AND PRECISION GROUND BEDWAYS
EXTREMELY WIDE BED WAYS
HEAVILY RIBBED CLOSED GRAIN CAST BED
DRIVE PLATE
OFF-SET TYPE TAILSTOCK HANDWHEEL
AUTOMATIC LUBRICATION OF GEARBOX, APRON, AND CARRIAGE
SAFETY CLUTCH IN CARRIAGE APRON
GAP BED
LEVER THRU INCH/METRIC (MODULE & DIMETRAL) THREADS
D1-8 CAMLOCK SPINDLE NOSE
DUAL APRON AND HEADSTOCK CLUTCH CONTROL
ROLL OUT CHIP PAN
EQUIPPED WITH:
THREAD DIAL
STEADY REST
FOLLOW REST
COOLANT SYSTEM
TAPER ATTACHMENT
12" 3 JAW CHUCK
15-3/4" 4 JAW CHUCK
RAPID TRAVERSE
TURRET CARRIAGE STOP
OPTIONAL EQUIPMENT AVAILABLE:
QUICK CHANGE TOOL POST
DIGITAL READOUTS
