Specifications
Equipped With
GENERAL SPECIFICATIONS:
LINEAR AXIS DATA:
RANGE: X-AXIS 24.0"
Y-AXIS 24.0"
Z-AXIS 20.0"
FEED RATES: X-AXIS 1 TO 500 IPM
Y-AXIS 1 TO 500 IPM
Z-AXIS 1 TO 500 IPM
RAPID TRAVERSE: X-AXIS 500 IPM
Y-AXIS 500 IPM
Z-AXIS 500 IPM
SPINDLE FACE TO TABLE CENTERLINE MIN. 5.0"
MAX. 25.0"
SPINDLE CENTER TO TABLE SURFACE MIN. 3.0"
MAX. 27,0"
AXIS WAYS: TYPE HARDENED GROUND
RECTANGULAR WAYS
INDEX TABLE: POSITIONS 360 BI-DIRECTIONAL
INCREMENTS 1 DEGREE
RAPID TRAVERSE 15 RPM - 5,000
DEGREES PER MINUTE
ACCURACIES POSITIONING +/- 5 ARC SECONDS
REPEATABILITY +/- 2.5 ARC SECONDS
ROTARY TABLE: POSITIONS (BI-DIRECTIONAL) +/- 360,000
INCREMENTS .001 DEGREE
FEEDRATE 8 RPM-2800 DEGREES
PER MINUTE
ACCURACIES: (POSITIONING) +/- 5 ARC SECONDS
(REPEATABILITY) +/- 3 ARC SECONDS
TABLE SIZE (6) 18" X 18"
WEIGHT CAPACITY 2,000 LBS.
DRIVE MOTOR HORSEPOWER CONTINUOUS DUTY 15 HP
INTERMITTENT 20 HP
MOTOR TYPE AC VARIABLE SPEED
SPINDLE DRIVE GEAR BOX
SPINDLE SPEEDS: NUMBER OR RANGES 2
SPINDLE SPEED RANGE 50-4000 RPM
FULL HP @ RPM 15 HP @ 250 RPM
SPINDLE SPEED RANGE 65-5,200 RPM
FULL HP @ RPM 15 HP @ 325 RPM
TYPE OF TOOLING ACCEPTED:
TOOL SHANK #50 TAPER V-FLANGE ANSI STD.
RETENTION KNOB #50 TAPER V-FLANGE ANSI STD.
TOOL CHANGER & STORAGE MAGAZINE
MAGAZINE CAPACITY 60 TOOLS
MAXIMUM DIAMETER WITH ADJACENT POCKETS
FULL 5.0"
WITH ADJACENT POCKETS
EMPTY 10.0"
TOOL SELECTION: LASEREADER YES
RANDOM YES
POCKET CODE YES FULL HP @ RPM
CHIP CONVEYOR: DISCHARGE HEIGHT 43.4"
KEARNEY A& TRECKER KT-GEMINI-D CONTROL
