Specifications
Equipped With
#90110-11
GENERAL SPECIFICATIONS: AS HYDRAULIC DEEP DRAWING PRESS
NEW APPROXIMATELY 1970
CAPACITIES:
DRAW SLIDE 140 TON MAX.
BLANKHOLDER 140 TON MAX.
PRESS AS SINGLE ACTION 280 TON MAX.
MAXIMUM DEPTH OF DRAW:
SINGLE STAGE DRAW AND LIFT-OUT 10"
TWO STAGE DRAW AND LIFT-OUT 13"
DRAW THROUGH AND STRIP-OFF 15"
DISTANCE BETWEEN SIDE HOUSINGS 58.5" L-R
AREA OF BED (NOMINAL) 58" L-R X 48" F-B
BED BOLSTER: (T-SLOTTED) WITH 18" DIA. 56" L-R X 48" F-B
THROUGH HOLE X 4.5" THICK
AREA OF DRAW SLIDE (NOMINAL) 30" L-R X 24" F-B
AREA OF BLANKHOLDER (NOMINAL) 46" L-R X 40" F-B
OPENING IN BLANKHOLDER 31" L-R X 25" F-B
BLANKHOLDER THICKNESS 7.25"
STROKE OF GIB GUIDED DRAW SLIDE 0-30" MAX.
STROKE OF GIB GUIDED BLANKHOLDER 0-21" MAX.
STROKE OF COMBINED SLIDES AS SINGLE ACTION 0-21" MAX.
DAYLIGHT OPENING:
DRAW SLIDE AS DOUBLE ACTION 54" MAX.
BLANKHOLDER AS DOUBLE ACTION 34" MAX.
COMBINED SLIDES AS SINGLE ACTION 34" MAX.
MAIN ROD DIAMETER 10.625"/9" @ 3155 PSI - 140 TONS
5.5"/5.12" @ 2935 PSI - 140 TONS
FLOOR TO TOP OF BOLSTER 34.5"
POWER UNIT (TOP REAR OF PRESS) DENISON MODEL T2DO2821801 FIXES
VOLUMN VANE PUMP, 29 SPM @ 2000
PSI & COMMERCIAL SHEARING MODEL
PM1000 D132 VARAIBLE VOLUMN
PISTON PUMP, 24 GPM @ 4000 PSI
BOTH DRIVEN BY 50 HP 1180 RPM
208/220/440/3/60 D.C. MOTOR
SPEEDS APPROX. 460"/MIN. CLOSING
60"/MIN. PRESSING
220"/MIN. RETURN
SPECIFICATIONS: AS DUALFORM PRESS WITH CASTING LASK IN PRESS
CAPACITIES:
MAXIMUM BLANK SIZE 46" L-R X 40" F-B
MAXIMUM SIZE OF FINISHED PART 30" L-R X 24" F-B
MAXIMUM DEPTH OF DRAW 8"
DAYLIGHT OPENINGS:
DRAW SLIDE 40.5" MAX.
BLANKHOLDER 20.5" MAX.
CONTROLS: PUSHBUTTON OPERATION WITH
STROKE SPEED AND PRESSURE
CONTROLS. AIR-WATER &
ELECTRICAL CONTROLS FOR
CASTING FLASK
EQUIPPED WITH:
PATENTED DUALFORM PPROCESS FOR CASTING DEEP DRAWING PRESS TOOLS
WITHINI THE PRESS ITSELF
WEIGHT APPROX. 45,000 LBS.
OVERALL DIMENSIONS APPROX. 100" L-R X 84" F-B X
14' HIGH
