Specifications
Equipped With
#98406-12
GENERAL SPECIFICATIONS:
DISTANCE BETWEEN LOWER ROLL CENTERS 8"
DIAMETER UPPER SHAFT 3"
DIAMETER LOWER SHAFT 2-1/2"
SPEED 33 FPM
LOWER ROLLS FIXED
EQUIPPED WITH:
HYDRAULIC ADJUSTMENT TO TOP ROLL
(1) SET OF ROLLS
(1) SET OF GUIDE ROLLS
SCALE AND DIAL INDICATORS FOR TOP ROLL ADJUSTMENT
5 HP AC MAIN DRIVE MOTOR
1.5 HP AC MAIN (PUMP) DRIVE MOTOR; ELECTRICAL CONTROLS
HYDRAULIC POWER UNIT (MOUNTED ON COMMON BASE WITH MACHINE)
DRUM CONTROLLER
CAPACITIES:
2" X 2" X 1/4" ANGLES - LEG OUT TO 20" MINIMUM DIAMETER
1-1/2" X 1-1/2" X 1/4" ANGLES - LEG IN TO 18" MINIMUM DIAMETER
3/4" X 3/4" X 1/8" SMALLEST ANGLE -LEG OUT TO 8" MIN. DIAMETER
3/4" X 3/4" X 1/8" SMALLEST ANGLE - LEG IN TO 9" MIN. DIAMETER
BEAMS ON FLANGES - 3" -7-1/2" TO 24" MIN. DIAMETER
CHANNELS (FLANGES OUT) - 3" - 4" TO 16" MIN. DIAMETER
FLATS ON EDGE: 2" X 3/8" TO 24" MIN. DIAMETER
FLATS ON FLAT: 3" X 3/4" TO 20" MIN. DIAMETER
ROUNDS AND SQUARES: 1-1/2" TO 8" MIN. DIAMETER
X HEAVY PIPE: 1-1/4" TO 8" IN. DIAMETER
XX HEAVY PIPE: 1" TO 8" MIN. DIAMETER
