Specifications
Equipped With
#97141-4
GENERAL SPECIFICATIONS:
SERIAL G-2465
NEW APPROXIMATELY 1978
TABLE WORKING SURFACE 11 X 24"
TABLE TRAVEL (LONGITUDINAL) 18"
TABLE TRAVEL (CROSS) 11"
SPINDLE HOUSING VERTICAL TRAVEL 12-5/8"
SPINDLE VERTICAL TRAVEL 3-5/8"
TABLE TOP TO WHEEL COLLET (ADJUSTABLE) 2 TO 18"
NOTE: RISER BLOCKS ARE AVAILABLE TO
INCREASE HEIGHT UNDER SPINDLE)
SPINDLE TO COLUMN WAYS 10"
SPINDLE TO COLUMN BELOW WAYS 13-1/2"
MAIN SPINDLE SPEEDS (INFINITELY VARIABLE) 25 TO 225 RPM
SPINDLE FEEDS INFINITELY VARIABLE AT
ONE INCH/STROKE SETTING ADJUSTABLE .100 TO 3-5/8"
GRINDING WHEEL SPEEDS 6,000 TO 175,000 RPM
WITH OPTION GRINDING
HEADS
GRINDING CAPACITY (HOLE DIAMETER) 1/64 TO 3-1/2" AND UP
TO 13-1/2" WITH
OPTIONAL EXTENSION
PLATES
ANGULAR ADJUSTMENT OF SPINDLE UP TO 1-1/2 DEGREES
FROM CENTER LINE
(3 DEGREE INCLUDED
ANGLE OVER FULL `
VERTICAL TRAVEL)
RADIAL OFFSET OF GRINDING SPINDLE COARSE ADJUSTMENT FROM
BEHIND CENTER TO
1-1/8" BEYOND CENTER
FINE ADJUSTMENT IN
INCREMENTS OF .0001"
FOR A DISTANCE OF
.075" ANYWHERE WITHIN
THE FULL COARSE
ADJUSTMENT RANGE
COMPRESSED AIR REQUIREMENT:
90-100 PSI AT 35 CFM OIL-FREE, FILTERED COMPRESSED AIR AT LESS
THAN 75% RELATIVE HUMIDITY AT THE MACHINE. AIR FILTER, PRESSURE
REGULATOR, PRESSURE GAUGES, AND AIR LUBRICATOR ARE SUPPLIED AS
STANDARD EQUIPMENT.
EQUIPPED WITH:
(1) MOORE 40,000 RPM GRINDING HEAD
(1) MOORE 60,000 RPM GRINDING HEAD
MOORE ROTARY TABLE, 10-7/8" DIAMETER (STANDARD TYPE, CATALOG
1230-5
MOORE 6" PRECISION VISE
MOORE DESK TYPE STORAGE CABINET
VARIOUS BOLTS, STRAPS, HEEL RESTS
ELECTRICS:
220/60/1 (PLEASE NOTE; JIG GRINDERS ARE SINGLE PHASE)
SPACE AND WEIGHT
SUGGESTED FLOOR SPACE FOR MACHINE 66" X 66"
MACHINE WEIGHT WITH STANDARD EQUIPMENT 4,000 LBS.
COLOR:
NMTB #7B LIGHT GRAY
